Kekreations 3D
patreon
Model Modification/Remix Policy and Updated Yarn Bowl
🕑 Added 2024-03-07 19:36:56 +0000 UTCHey everyone!
Reminder that I DO NOT allow modifying or remixing my designs in ANY WAY without PERMISSION first. Doing so has the potential to get you removed from the Patreon entirely if warnings are not followed. This includes moving or swapping out links in flexis, adding holes, changing sculpted figures, or any other modifications that change the appearance or function of the original model.
There are many instances of SMALL modifications that don't change the overall appearance or function of a model that I will happily allow,. But there are many different reasons I may NOT allow a modification to be made, which is why you should always ask permission and clarify what is allowed before making any changes to models. (Repainting 3MFs for multicolor painting is always okay! Just not sharing those files with others)
On that note-- here's an updated mod to the dragon yarn bowl since many of you were hoping for tool holding holes to be added to the bowl!
Same print recs as the original bowl!
Model link: https://www.kekreationsart.com/patreonmod
Refer to the pinned Patreon post here for the site password! (Once you use it once your device should remember it for next time) https://www.patreon.com/posts/3d-model-access-82725512
I hope y'all enjoy the additional edit!
Thanks so much for all your support <3
- Kek
EDIT: A couple of people were having some issues with the overhangs on the new holes so I made a couple of tweaks so they should print smoother for y'all! :)
Comments
Kirsten McKenzie
Yes, that's totally fine! :) Since the end result is still the same whole model ^.^
Crystal Bryden
Would slicing a file to print a part that failed during print be OK? So, for example, from another creator for little pieces of a dragon had failed on the bed but the other 98% had printed just fine and I didn’t wanna waste the prints so I cut the failed portion in a slicer to just print those few links, and reattach them to the printed dragon. A very small portion had knocked itself loose from the print bed and caused layer shifting.
Data Diva
Would it be possible to add another tool tube behind the ear? My roommate was using it and it fell off the table and the ear cracked. Putting something behind it would add more storage space and make the ear sturdier in case a cat knocks it off the table.
