mrbaddeley
patreon
Full Scale Dome test published
🕑 Added 2017-04-23 20:23:33 +0000 UTC OK, I've just dropped the first design for the full scale dome into the early bird Patreon share (no instructions at this stage but will follow). This is a large print and I've only printed a couple of parts myself so far, so this is for early testers only :-). The design has removable supports so no supports needed generated by the slicer. It also is designed for .3 layer height for speed, full CSR size / spec. Panels have holes for 4mm bolts to hold the dome together and 1.75 holes for filament pegs to align the top pie frame. I've also inlayed the panels so you can print thicker panels to be more robust. All Panels and Pie pieces are also uploaded. The upper and lower rings will follow..... It will be a few weeks before I publish to the public folder as I need to test it before release!
Comments
Michael Baddeley
Hiya, please if you've got it. I've split them into 6 for the smaller cut build but would be curious to see yours.
MB- I had to split the upper pie into 4 parts for my i3. I even added the filament alignment holes. Would you like the link to them?
