1usmus patreon

HYDRA 1.0D PRO - RELEASED!

🕑 Added 2021-11-26 21:52:44 +0000 UTC

Comments

Rahid Ahmed

I'm having same issue. I was able to run successfully finish the process on previous version. However, with new PRO version. Computer restarts immediately when i click diagnostic process.

elpuertorro

Hey, they are 2 versions the free one being 1.0E and the paid 1.1C that got release yesterday If you don't have access use 1.0D pretty solid until the new ones trickle down. you will see what is available to you here in the post section if you look further down Also not needed but I would suggest you do a fresh new diagnostic.

fredo

There is no 1.1E?

elpuertorro

Look further down in post for newer builds 1.0e, well at this point we on 1.1C so might want to give that one if it's available to you if not the last free version i think is 1.0F you can find it on discord or in the other postings.

fredo

I get a note about a 1.0.0.6 update indeed. How do I perform the update?

cvzone

1.0F is only available as free version. 1.1A PRO is the latest version and 1.0E the latest PRO Version below Version 1.1

mikengail

I'm using Pro version 1.0D and every time the program starts I get a message that says that I'm using version 1.0.0.5 and the newest is 1.0.0.6 version. I can' find this version anywhere. Is this the same as 1.0F? If I install the free version of F over D will it still be a Pro variant? I also can't find a 1.0F Pro version. Need some help here. Thanks...

Bill Bittel

Agreed a Hydra thread on OC.net would be great. There is a lot of good stuff on the Discord channel but I find it hard to follow all the different conversations going on at once. There does not seem to be a lot of activity here. No posts in 6 days ?!?

Robert Smith

Why is 1.5 VID blocked from Hybrid table? It's the stock peak VID and I can cool it, so not seeing why I shouldn't use it for 1-2T loads.

Robert Smith

One small feature request. Pause of diagnostics, so an option like "start with windows" can be enabled instead needing to restart the whole process.

@Yuri Have you considered creating a thread for Hydra on Overclock.net? Would be a great space to share thoughts, ideas, etc...

Peter

My CPU is also no longer Gold/Silver, however, difference is very little. I've had a CCD2 problem like yours once. I had to retest with finding the right voltages and that fixed it for me. At this moment I'm hitting 29680 points at 4,4ghz. I'm sure with some more tweaking I can hit the 30k mark.

Yes, it showed before and after. My Performance took a hit with Diagnostics on this version or my CPU degrading? It says Bronze for both CCDs now (before CCD1 Gold, Silver depending on run and CCD2 Bronze). CCD2 always has been weaker for sure but pretty poor now. Tuned 20950, default 20470. Interesting part is CCD2 is showing Tuned 4030 but Default 4138 but CCD1 gains 200 to 4374. Also shows Stock 5900x @ 21646 so thats more than my system. Temps still good so far.

Peter

Any 5950x users used the ''Compare'' function yet on their systems? I'm curious what results you're getting back!

Joni Ollanketo

Yes disable and everything according Hydra manual. But I Will try out the Hydra E version tomorrow

That would be awesome, thank you very much!

Yuri Bubliy

Curve Optimizer disabled(auto) in BIOS?

Yuri Bubliy

I will make a separate profile for mining. I think in next month.

Joni Ollanketo

What to do if crashing when CO test starts?!? No problems with 1.0C version. 5950x, MSI Unify X570, 3800Mhz RAM, Windows 11.

Alexander Wünsche

Mining won't be supported at all!

Hi Yuri, would it ever be possible to separate avx1 & avx 2 into separate profiles. Using a 5950x for mining with avx 1 & 2 rotation. Really being able to fine tune frequencies for both separately would be fantastic!

Thanks Yuri! How do I determine best PPT, EDC and TDC (5900x)? Guide says to add 30 for Normal OC etc. but seems high? I found online PPT 185, EDC 170, TDC 125 and running with that. Running this now, been using 1.0a because it had best results for me so far. Love the great reviews so hopefully works nicely for me as well.

Daniel Stroh

Hi Yuri! Its been a while since my last post. I was very happy with CTR and have been waiting for 1.0D Hydra to test it again and compare it to CTR Win10 vs now Hydra 1.0D on WIn11. Here are my system specs for reference: 5900x watercooled ASUS ROG Crosshair VIII Hero Bios ver. 3801 SMU ver. 56.53.00 64 GB CL 16 G,.Skill Trident RGB 3.600 MHz (Stable :-) ) RTX3090 Asus Strix OC watercooled 2x 360 radiator in a Lian Li O11 dynamic XL with 6x EK Vardar X3M mounted to them EKWB Distro Plate with D5 Pump front mounted Here are my thoughts: For me Hydra 1.0D is after a short getting to know the software and (and that is important) YOUR thoughts behind every setting just the better version of CTR for enthusiasts and "amateurs" alike. That is given you have a basic understanding of what we are doing here and of course the ability to read and understand your good documentation. For me I am getting more boost clocks and instead of consuming ~100 watts in gaming down to ~80 watts of energy consumption. The measurement took the whole night and I went for the find best voltages, too. Great thought also to include a 20 minute warumup phase :-) For you as a reference point also here are my results: Results CCD testing CORE#1 CO: -6 CORE#7 CO: 80 CORE#2 CO: 18 CORE#8 CO: 50 CORE#3 CO: 24 CORE#9 CO: 78 CORE#4 CO: 31 CORE#10 CO: 54 CORE#5 CO: 46 CORE#11 CO: 58 CORE#6 CO: 16 CORE#12 CO: 72 Energy Efficiency CCD#1 4 | GOLDEN sample Energy Efficiency CCD#2 3.85 | BRONZE sample AVX2: The power limit has been reached: 142.3W Voltage you are looking for: 1087mV Best voltage: 1000mV Optimal voltage: 1075mV AVX1: The power limit has been reached: 142.3W Voltage you are looking for: 1262mV Best voltage: 1112mV Optimal voltage 1: 1162mV Optimal voltage 2: 1212mV Profiles: -= PROFILE: 1T-2T =- VID: 1375mV CCD1 FREQUENCY AVX1: 4825MHz FMA3: 4750MHz CCD2 FREQUENCY AVX1: 4675MHz FMA3: 4600MHz -= PROFILE: 3T-4T =- VID: 1375mV CCD1 FREQUENCY AVX1: 4800MHz FMA3: 4725MHz CCD2 FREQUENCY AVX1: 4650MHz FMA3: 4575MHz -= PROFILE: 5T-6T =- VID: 1325mV CCD1 FREQUENCY AVX1: 4750MHz FMA3: 4650MHz CCD2 FREQUENCY AVX1: 4600MHz FMA3: 4500MHz 09:50:27: Test 1 finished! 09:50:27: Test 2 started! 09:50:27: 7T-12T DEBUG INFO: Start VID: 1275mV Start CCD#1 FREQ: 4275MHz Start CCD#2 FREQ: 4150MHz Vdroop: 1.49% CO reserve: -9 / -3 09:50:48: Cinebench stopped! -= PROFILE: 7T-9T =- VID: 1325mV CCD#1 FREQUENCY AVX1: 4775MHz FMA3: 4675MHz CCD#2 FREQUENCY AVX1: 4600MHz FMA3: 4500MHz -= PROFILE: 10T-12T =- VID: 1275mV CCD#1 FREQUENCY AVX1: 4700MHz FMA3: 4600MHz CCD#2 FREQUENCY AVX1: 4525MHz FMA3: 4425MHz 09:50:48: Test 2 finished! 09:50:48: Test 3 started! 09:50:48: ALL THREADS (AVX2) DEBUG INFO: Start VID: 1262mV Start CCD#1 FREQ: 4175MHz Start CCD#2 FREQ: 4100MHz Vdroop: 2.46% 09:51:05: Cinebench stopped! PPT limit reached! 161,3W 09:51:05: Test 3 finished! Excuse this long comment just wanted to give you some reference data points if needed. After testing many games and applications I can confirm that (for me) it runs stable!!! No crashes or temps that are too high in certain scenarios. You have earned a big thank you! Thanks to your incredible dedication to Hydra/CTR AMD Zen3 processors can run finely tuned like they were supposed to. Thanks Yuri and have a great day! :-) Greetz Daniel

Alexander Wünsche

@Yuri Bubliy So HYDRA's priority is now "real time"? Is this intended? On the other hand, it just works =) Thank you!

Alexander Wünsche

Did you even read this thread? IT'S A FALSE POSITIVE!! Yuri mentioned it again and again...

Hi, Windows Defender and VirusTotal flagged this file (Hydra.exe) as malicious, any suggestions ?

I gave up trying to understand the technical stuff a while ago, all I know my CPU runs faster, cooler and rock solid. Thanks for all the hard work!

Jamie Godwell

When it happens, no profile switching takes place & the readouts for current core speeds per CCD stops updating

Jamie Godwell

I'm having issues where Hydra gives up on changing clock speeds until I reopen the program, generally locking everything 1-2T mode with all the other cores running slow. I've only seen this happening with 1.0D & I'm on Win11 if that makes any difference

Yuri Bubliy

It is not necessary to search for these settings, if you have not made any changes to them by default they will remain relevant. My only recommendation for the bios is manual voltages and disabled or auto Curve Optimizer mode. Don't get on your nerves, it's easier, I try to keep all the default settings perfect ;)

Peter

HYDRA BOOST TESTER RESULTS CORE / FREQUENCY / VID / POWER / TEMP C01 F 4998 V 1.375 W 13.12 T 51.45 C02 F 4894 V 1.375 W 13.08 T 51.36 C03 F 4968 V 1.375 W 13.09 T 48.88 C04 F 4949 V 1.375 W 14.16 T 52.08 C05 F 4964 V 1.374 W 12.58 T 51.38 C06 F 4956 V 1.375 W 13.03 T 48.76 C07 F 4974 V 1.375 W 13.1 T 51.84 C08 F 4902 V 1.375 W 13.1 T 50.52 C09 F 4888 V 1.375 W 12.07 T 53.58 C10 F 4846 V 1.375 W 11.09 T 48.85 C11 F 4400 V 1.242 W 9.5 T 44.94 C12 F 4750 V 1.344 W 10.6 T 48.31 C13 F 4899 V 1.375 W 12.98 T 52.78 C14 F 4831 V 1.375 W 10.84 T 49.51 C15 F 4872 V 1.375 W 11.18 T 52.31 C16 F 4846 V 1.375 W 10.95 T 50.44

Peter

Temps are great! Higher overall frequencies. Stable under heavy load. Nice one!

Can someone answer this: Are the previous required BIOS settings used for CTR apply with HYDRA? Specifically: Global C-State = Enabled Power Supply Idle Control = Low CPPC = Enabled CPPC Preferred = Enabled Thanks in advance

Rory O'Donnell

Initial impressions are very good. Seems I get higher frequencies for less voltage and idle temps are excellent

Any alternatives that are any different? (IMHO Windows Defender is the best option so people should actually use it)

Peter

People need to stop using Windows Defender.. honestly they got better, but it's still a pain in the A with so many apps