1usmus
patreon
HYDRA 1.1D, HYDRA 1.1E and HYDRA 1.2A
🕑 Added 2022-02-14 09:57:54 +0000 UTCUnfortunately or fortunately, HYDRA turned out to be a rather complicated software product. To help you with setup and diagnostics (and not only), there will be an update this month which will include an assistant, that will ask you simple questions and, depending on the answers, change the parameters and tolerances. The name of this update is HYDRA 1.1E PRO.
In a couple of days we will also release the interim update HYDRA 1.1D PRO, which contains more than 30 important changes. These are bug fixes, new features, stability and performance improvements. I pay special attention to all your comments and suggestions.
Regarding the automatic video card tuner. As it was planned before, HYDRA 1.2A PRO will contain such a module. This time I do not want to rush or provide an alpha version. The release date for early access is March.
About delays. I think some of you know that I am from Ukraine and my hometown (Kharkiv) is on the border with Russia. Nothing is happening at the moment, but anyway I have to take my time to prepare for the worst case scenario and protect my family and myself. This is not to say that the project is in jeopardy, it just means that there may be temporary delays with releases or feedback. I will do my best to meet your expectations. I really hope for your understanding. Thank you! :)
P.s. Happy Valentine's Day!
Comments
Hodaka K
Hello. I did a little tinkering. I have a small problem to report. Text is out of frame. Maybe it's the Japanese system font. The ON/OFF of the selection switch is still working. Like this https://i.imgur.com/7KwYZcr.png windows11pro IP Build 22581 thanks.
RomanoTheXVS
We wish you and your family all the best in these difficult times
I'm going to test the latest versions since I wasn't able to catch up since a few past releases, having a hard time at work here. I didn't know about you living in Ukraine, hopefully, all this matter remains calm and nobody gets hurt. Anyway, first things first, do not worry about an intangible bunch of source code (with respect, from one programmer to another) and take care of yourself and your family. I'll be wishing the best for you and your people. Nicolas, from Argentina.
dont worry about the priject, first you and your family must stay safe and then if you want or can continue with good work.
Ju Ma
jupp, stay safe. First safe your family, these are bad days. Pandemic, inflation, war, extremists ........
Larry Hope
Where to download 1.1D? Didn't see it on the post.
I would try bumping the voltage ~25 for the 1-2 Thread profile. There have also been some issues with things like lightingservice and asusfancontrol. Best best is to join discord, they seem willing to help and have a lot of knowledge.
Doug Wilkinson
Stay safe and let us know if we can help
Зря паникуете, Юрий! Есть возможность подружить гидру с 3dmark?
Travis Baptiste
The the lives of you and your family is more important than a program ty for all your hard work and i wish you and you family happy 💝
Shane Allen
I already tried lowering the CORE#1 CO in Table 1 (Low-Thread) by 20. I also tried limiting my peak frequency, down from 5100 Hz to as low as 4800 Hz since it would frequently hang at 4900 Hz. Lowering the Low-Thread CO by 20 seemed to help, but didn't solve the problem. Neither did limiting the peak frequency, even at 4800 Hz.
Shane Allen
Here's the most recent crash log (I just realized the most important system specs are already listed in the log!) - ***HYDRA 1.1C PRO by 1usmus*** 02/12/2022 14:22:39 Microsoft Windows NT 6.2.9200.0 AMD Radeon RX 6900 XT, driver ver. 30.0.14023.7007 AMD64 Family 25 Model 33 Stepping 0, AuthenticAMD AMD Ryzen 9 5950X 16-Core Processor GIGABYTE X570 AORUS XTREME BIOS ver. F35d SMU ver. 56.58.00 TABLE ver. 3672069 DRAM speed 3600 MHz 14:26:37: MODE RSMU CMD 5 ARG 0 14:26:52: MODE RSMU CMD 5 ARG 0 14:37:04: MODE RSMU CMD 93 ARG 7344557 14:43:39: MODE RSMU CMD 93 ARG 3150253 ***HYDRA 1.1C PRO by 1usmus*** 02/12/2022 15:00:15 Microsoft Windows NT 6.2.9200.0 AMD Radeon RX 6900 XT, driver ver. 30.0.14023.7007 AMD64 Family 25 Model 33 Stepping 0, AuthenticAMD AMD Ryzen 9 5950X 16-Core Processor GIGABYTE X570 AORUS XTREME BIOS ver. F35d SMU ver. 56.58.00 TABLE ver. 3672069 DRAM speed 3600 MHz 15:13:13: MODE RSMU CMD 93 ARG 3150478 15:30:05: MODE RSMU CMD 5 ARG 0 15:43:15: MODE RSMU CMD 5 ARG 0 ***HYDRA 1.1C PRO by 1usmus*** 02/12/2022 15:58:00 Microsoft Windows NT 6.2.9200.0 AMD Radeon RX 6900 XT, driver ver. 30.0.14023.7007 AMD64 Family 25 Model 33 Stepping 0, AuthenticAMD AMD Ryzen 9 5950X 16-Core Processor GIGABYTE X570 AORUS XTREME BIOS ver. F35d SMU ver. 56.58.00 TABLE ver. 3672069 DRAM speed 3600 MHz Information about the last failure Date: 02/12/2022 15:56:47 Unstable frequency, APIC ID: 1 If the failure occurred in a game: Decrease by 25 the values for "GAME CO offset" (SETTINGS tab). If the failure occurred in a multi-threaded load (CPU usage > 65%): In the CO table #2 reduce the CO for CORE#1 by 10 or in the "SSE CO offset for MT" increase the CO by 10 for CCD#1. Do not forget that too high a value of "AVX1 CO offset for MT" for CCD#1 can also cause a system crash. If the failure occurred in a low-threaded load (CPU usage < 65%): In the CO table #1 reduce the CO for CORE#1 by 20 or in the "SSE CO offset for LT" increase the CO by 10 for CCD#1. Do not forget that too high a value of "AVX1 CO offset for LT" for CCD#1 can also cause a system crash. If the above information is difficult for you - press the "MINUS" button for both CO tables. ***HYDRA 1.1C PRO by 1usmus*** 02/12/2022 16:01:29 Microsoft Windows NT 6.2.9200.0 AMD Radeon RX 6900 XT, driver ver. 30.0.14023.7007 AMD64 Family 25 Model 33 Stepping 0, AuthenticAMD AMD Ryzen 9 5950X 16-Core Processor GIGABYTE X570 AORUS XTREME BIOS ver. F35d SMU ver. 56.58.00 TABLE ver. 3672069 DRAM speed 3600 MHz Information about the last failure Date: 02/12/2022 15:56:47 Unstable frequency, APIC ID: 1 If the failure occurred in a game: Decrease by 25 the values for "GAME CO offset" (SETTINGS tab). If the failure occurred in a multi-threaded load (CPU usage > 65%): In the CO table #2 reduce the CO for CORE#1 by 10 or in the "SSE CO offset for MT" increase the CO by 10 for CCD#1. Do not forget that too high a value of "AVX1 CO offset for MT" for CCD#1 can also cause a system crash. If the failure occurred in a low-threaded load (CPU usage < 65%): In the CO table #1 reduce the CO for CORE#1 by 20 or in the "SSE CO offset for LT" increase the CO by 10 for CCD#1. Do not forget that too high a value of "AVX1 CO offset for LT" for CCD#1 can also cause a system crash. If the above information is difficult for you - press the "MINUS" button for both CO tables. PCI-MUTEX holding time has expired! Retrying to send a command! PCI-MUTEX holding time has expired! Retrying to send a command! ***HYDRA 1.1C PRO by 1usmus*** 02/12/2022 16:38:10 Microsoft Windows NT 6.2.9200.0 AMD Radeon RX 6900 XT, driver ver. 30.0.14023.7007 AMD64 Family 25 Model 33 Stepping 0, AuthenticAMD AMD Ryzen 9 5950X 16-Core Processor GIGABYTE X570 AORUS XTREME BIOS ver. F35d SMU ver. 56.58.00 TABLE ver. 3672069 DRAM speed 3600 MHz
Shane Allen
I agree with everyone else, the safety of you and your family is far more important than Hydra and CTR! Please take all precautions you deem necessary, and don't worry about delays. That said, I have reason to believe that Putin and Russia may be maneuvering along the Ukraine border as a negotiating tactic, rather than as a prelude to attack or invade. Be that as it may, I have no high-level connections or insight, so this should be taken as speculation. Regarding Hydra, thanks for the continued updates and improvements! as of this past weekend Hydra 1.1C was still crashing in low-threaded, high-clock to idle scenarios. This was particularly apparent while running Call of Duty: Warzone and allowing the game to idle in a menu - after a while, my PC would either A) freeze, typically with monitoring software frozen at a high clock speed & low thread-count (~4900 Hz), or B) crash and soft reboot, often with nothing to show in the log. Any ideas? I'll be happy to [Reply] to myself with a log (tell me how much you need), system specs, etc.
Roman Pearce
Your safety is more important than the work you are doing. We all appreciate your development on this paltform. stay safe.
Ricky Campbell
Stay safe bro ,Your Safety and Family are more important .
ZeRØ Kill
I HOPE THAT NOTHING WILL HAPPEN, BUT I WISH YOU A LIFE OF PEACE AND SERENITY.
Don't worry about us, family always comes first!
Daniel Robaina Cazorla
We are not important, stay safe!!!
Stay safe!
iNerd
i dont wish to repeat what ppl before me posted. taking care of your family and yourself in worst case is your priority. Stay safe! Our desktops and we can wait. That‘s also a community support from the real community! ❤️
Tom Parkinson
Thank you for your continued detailed updates on progress for Hydra, but the safety of you and your family is priority. Take care Yuri and stay safe.
I second everyone’s comments - don’t worry about us and focus on your and your family’s safety if it escalates. Take care and all the best
Morgan Ring
Stay safe mate!
Ravi Dissanayake
All the best for you and your family yuri. You have achieved a great deal with hydra.
Blueboy X
Be safe! Good luck to you and your family.
Jake Mormile
Your safety is more important than anything else, appreciate everything you do!
