nalulululuna
patreon
NalulunaCountersHelper
🕑 Added 2021-06-09 17:35:39 +0000 UTCDownload
NalulunaCountersHelper 0.0.2 (testing)
https://drive.google.com/file/d/1nr7xMje-W-QyAEcgy7dGCXUfwJ0aS3XA
NalulunaCountersHelper 0.0.1 (testing)
https://drive.google.com/file/d/16WDdDuFw1R0iNq1hfENWzwPA6LJejepM
- This software is available only to my supporters, so please do not provide the file or download link to anyone else
- No problem publishing images and videos showing this software
Description
This is a software to enable NalulunaCounters to display the heart rate measured by a smartwatch or a heart rate monitor. If you don't have a heart rate monitor or don't want to display your actual heart rate, you don't need this software.
The mechanism is that NalulunaCountersHelper reads the heart rate numbers displayed on the PC screen somehow, and makes them available to the mod. In other words, it is necessary for the user to build an environment to display the heart rate numbers on the PC screen.
Setting up this environment requires a certain level of PC and smart device skills. I am sorry, but I cannot provide support for setting up this environment because the operation and software used will vary depending on the phone or smart device you are using.
Setup
1. Display the heart rate on the screen of your phone
2. Mirror your phone's screen on your PC (google how to do this)
3. Adjust the NalulunaCountersHelper settings (capture window, position, and size) so that it can capture the heart rate part of the mirrored screen in step 2.
Setup Examples
(In the following example, it recognizes the heart rate on the Pulsoid dashboard, but as for Pulsoid, you can now get the heartbeat without this software. Please refer to the Pulsoid section of NalulunaCounters for details)
1. Example of using a Mi Band with Pulsoid. Here is what you need to prepare.
- Android smartphone (2. to 7. are operations on the phone.)
- Mi Band (I checked it works on Mii Band 6, but it's too new and might be unstable...)
2. Install "Mi Fit" app and pair it with your Mi Band
3. Go to the "Profile" tab in the Mi Fit app and select Mi Band in My Devices. On the next screen, turn on "Discoverable" and turn on "Activity heart rate sharing."
4. Install "Notify for Mi Band" app and pair it with your Mi Band
5. Select Heart Rate in Notify for Mi Band app, enable Heart Rate Monitor, and change the interval to Continuous (if you use the free version, you will need to watch a few ads here)
After these settings, check that the heart rate graph is updated every few seconds.
6. Install Pulsoid app and log in with the account you created in step 1.
7. Select Mi Smart Band from the list of "Choose your device" in Pulsoid app. If it does not appear, turn off and on "Discoverable" in step 3.
After selecting, check that the number appears in the "Beats per minute" field.
8. From here on, you will be using a PC. Start NalulunaCountersHelper.
9. Press the Execute Command button. Chrome will be launched in the upper left corner of the screen, and log in with the account you created in step 1.
If Current Status is Online and Heart Rate is displayed, the settings up to 7. have been set successfully. In case of Offline, check 3. 5. 7. or reboot your phone.
10. If the heart rate number is cut out in the Captured area as shown in the image below, it is successful. If the number is not in the cutout area, adjust the position with Capture Position and the size with Capture Size so that the number is cut out.
11. Start Beat Saber and check that the heart rate number is displayed on the Activity Counter of NalulunaCounter.
12. Next time, follow step 7. and later.
Settings
Capture Interval: Interval to capture the screen (in seconds)
Capture Window Title: Title of the window to capture.
Capture Postion: Capture position. Relative to the top left corner of the window.
Capture Size: Capture size. Width and height
Capture Window to TopMost: Make the capture window always topmost.
Command: Command line to open the Pulsoid dashboard.
Execute Command: Executes the above Command
Captured: The captured image according to the above settings
The upper left corner has a green background so that it can be cropped by OBS.
Information
I'll note down the information to show the heart rate on the PC with several devices. For URL-based methods, if you rewrite the URL part (and resizeTo) of the NalulunaAvatarsHelper command, you should be able to call it with the Execute Command button.
iPhone + Apple Watch
https://obsproject.com/forum/resources/hyperate-io-embed-your-heart-rate-with-apple-watch.1218/
Samsung (Galaxy) Watch
https://github.com/loic2665/HeartRateToWeb
https://galaxystore.samsung.com/geardetail/tUhSWQRbmv
Android + Samsung (Galaxy) Watch
https://play.google.com/store/apps/details?id=com.bmi.hr_monitor
Fitbit
https://www.microsoft.com/en-us/p/fitbit/9wzdncrfj1xx
