bigovereasy posts
Posts: 126
Files: 836
Unfinished projects
Alas, there are such projects, for various reasons not completed.This project is codenamed "Sh80kV"The title is inspired by the movie "Electric Dragon 80,000 V" This is a Japanese arthouse lasting no more than an hour. I will be surprised if you have already watched this movie before π So it's a stun gun. There are two converters for a couple of thousand volts, each for a type 18650 battery.I found 4 titanium hexagonal bolts...
Cassete Keychain (Free version)
The cassette version that includes the case is available here if you subscribe. Also available on cults3d:https://cults3d.com/en/3d-model/home/cassete-keychainFor my patrons I will publish a version with two reels πΌ, in early access π₯³Free download version: Cassette_whole(increased clearance).stlVersion is relevant for 0.4mm nozzle. There is a clearance of 0.3mm between the reel and the body. Cassette_whole.stlThere is a clearance of 0.18mm ...
The peculiarity of printing
Not everyone succeeds in printing the cassette.I made the gap between the reel and the body 0.18mm. Usually in the slicer I set the value "wall width" to 0.3mm, layer height 0.15mm. This feature is due to the fact that I have several printers. I am guided by the one with a nozzle of 0.3 mm. As a result, this is not very convenient, since later you have to adjust the slicer parameters to the design. This is certainly not convenient for ord...
A little bit of the creation process
When I do the design, there are a few iterations of prints. Is it normal.I managed to make the cassette case about the 7th time.I also tried to print with SBS. It is a bad idea to use it for thin hinges as it is flexible. But in combination, PLA is quite possible. I don't have much experience with SBS, so far it turns out a "dirty" print.This cassette with one reel turned out after the second attempt (formally).Initially, I did with t...
Keychains π print in place
I made a keychainsSmall size so you can carry in your pocket. Print in placeComing Soon to cults3dYou can try it now, I can make small changes.There is a clearance of 0.18mm between the reel and the case. I applied silicone grease Glidex and washed with water, after which it rotated perfectly.I modelled a case for the cassette, it remains to print and check.Case for the cassette will be "print in place" too.
Toothpaste dispenser
This is my first design that has received a lot of attention and feedback.A gnome named Steve, from the Gravity Falls TV show. Most of the time spent on painting it and making the video. Modeling didn't take long.Later, I added a body to him, like a head holder, as well as a rainbow that can be made directly from filament.πͺ₯ππhttps://cults3d.com/en/3d-model/gadget/shmebulock-toothpaste
