squirrelf3d posts
Posts: 136
Files: 775
Y axis full setup - ender3v2 and similar
included with patronage -------- update July 2024 more user-friendly endstop mount -------- This is a fully redesigned Y axis setup. I have made a wheel version of it, but the rail setup is the perfected one. This will allow any nema 17 motor up to 48mm long on the Y axis. The rail model was designed so that the belt is parallel to itself and perfectly flat for better precision, as the slightly triangular shape of the belt Amy not have a perfe...
Y motor mount for nema17 42-48motor and smaller - revisited
Fully redesigned motor mount on ender3pro/v2 for up to 4248 motor (and smaller) Optionally you can add a "F695-2RS Bearing 5x13x4 mm" (https://www.aliexpress.us/item/2255800905868523.html)inside it not sure if it helps but it worked. The M5x8 or longer have to be socket head, they barely fit but with a small push they did, button head are a bit wider and won't fit(I had limited space to perfectly line up (vertically & horizontally) th...
Y tensioner for 4040 (revised) - for printer similar to ender3v2, ender3max neo
----------------------------------------Download here (shop area)-------------------------------------------No print supportThe front of the extrusion must have M5 threaded holes (like ender3v2 and ender3max neo), not sure ender3pro has those tapped, but should be easy----I had made a version keeping compatibility with ender3v2 stock slider part, but tolerance were a bit loose, so redesigned it from scratch with a new sliderThis has decorative &#...
Dual Y Linear Rail on ender3pro/3v2 style printer with 4040 extrusion - revisited
I had a couple people with binding issue with the previous model so I created a slit model that interlocks loosely just to help with installation. Playing it safe.To which I also added an ADXL mount by request (15mm spacing screw point), so should work with most generic ADXL and likely the BTT usb adxl v2Had another request to make it back a single piece version of it with the adxl, so I also added an extra 0.1mm tolerance to possibly take care o...
SquirrelFan - 5015 fan (updated Dec 2024)
included with patronage --- dec 2024 update : added different wire out position on the fan case and FYI the Apollo2025 has full support for a symmetrical fan setup ---- WARNING: I will not be responsible for any injuries! Be warned we are talking about fans that can spin at 20K~30K RPM The blades I designed are attached on top and bottom by a ring for strength. But if you design a fan blade like standard 5015 that are only attached at the botto...
Ender3 "v1" - with 4020 Y extrusion - Dual Linear rail - PROTOTYPE
Dual Linear rail setup This will work without the Y tensioner or big motor BUT you will lose some Y move without the Y tensioner. BIG motor upgrade is 100% optional, stock setup should work fine, just need to relocated the endstop, file is included HOWEVER the belt grabber is questionable, may work or may still need some work, and only through your testing can it be finalized fully (I do not have an ender3v1 to test this) It will work without ...
Ender3 "v1" - Y axis full "facelift" — big motor + MGN12H 300mm rails + Y tensioner
Files are be posted in the shopI will add more info to them, but files are there at leasthttps://www.patreon.com/squirrelf3d/shop/170304-----At this stage consider it a prototype, it's not something I can test as I don't have an ender3 "v1"But the rail mount itself will be tested soon by our fellow Koffing on discord, so huge thank you for taking the risks-----Full Y setup upgrade - with parts that were tweaked to work with each o...
sherpa_mini_release_2_rev1 - Remixed for Orbiter 2 mount
Small remix from the Serpa mini, all credit goes to ANNEX ENGINEERING for creating and designing the Sherpa mini.Original project Github: https://github.com/Annex-Engineering/Sherpa_Mini-ExtruderSTL: https://github.com/Annex-Engineering/Sherpa_Mini-Extruder/tree/master/STLsLICENSE INFO:https://github.com/Annex-Engineering/ANNEX-Engineering-License-Agreement----In case you printed the Orbiter backplate for the bowden mount, and then realized you d...
5015 SuperFan and UltraFan
Files in the Patreon shop (included with patronage): https://www.patreon.com/squirrelf3d/shop/squirrelfan-5015-fan-super-powered-by-180267A single one of these fan is of course enough to provide plenty of air power, but running it at lower speed to reduce the noise and only a small tweak to the apollo to accommodate them is the short term goal.Later will work on a shroud with one of those integrated into it.I'm incrementally adding the SuperF...
Coming soon! printed 5015 fans - and symmetrical version
This uses a 3 wire brushless motor meant for micro drones, so does complicate things a bit, but will simplify it all down for you.Weight about 22~23grams (including screws), so about the same as a 5015There is a small downside this is not as quiet as a 5015, even at similar air flow. but does allow a LOT more air than a 5015 6K rpm ( like gdstime), like 4~5times more, and symetrical setupThe large opening version should have less pressure but mor...
Apollo to Sovol SV06 (linear rod) prototype
In case any of you have a Sovol SV06, here is preliminary direct support for itI don't have one so this should be considered a prototypeThis is meant to be used with the linear rail model of the Apollo with the universal main bodyThere are two preliminary optionOption1:Meant to be used with the PCB and metal plate3 screws behind the metal plate (instead of holding the stock extruder would hold the adapter.) then mount the Apollo onto the adap...
How to connect to my Discord Server
There is a wonderfull community on my discord server, and it's also easier for me to provide support, as image can be exchanged very easily.It's not just about the Apollo, but we also help each other with 3d printing, with no drama or mean sarcastic comments.1 - Go to your user settings2 - click on the "More" dropdown and select "Connected apps"3 - click on the little arrow4 - you'll get a pop up with a login screen, u...
Motor block cover - update for wheels setup (ender3/pro/3v2/3maxneo)
Will likely work on many non ender3 printer as well, as most bed slinger share that X axis setup.The linear rail required an updated block to relocate the endstop but the wheels setup didn't, so had not made one.But then you'd be missing on a few goodies. you can now use accessories that mounts to the left side of the block like this: (they are in the Apollo zip file, but will include them here)I don't remember if the stock motor bloc...
Smart Orbiter v3 - for Fokoos Odin5 F3 (ender3 by request)
I don't know how many of you have a fokoos Odin5 f3, I'm guessing not many, but here is a Smart Orbiter v3 mount for it, as that what I tested this on.I'll be making on a request basis (so do let me know), otherwise this is low on the to do list:- stock ender plate + bltouch/crtouch- whambam + bltouch/crtouch- 100% printed (similar to renders above) top linear rail + Beacon / Cartographer (or bltouch/crtouch)if anyone has a common top...
Fokoos Odin F5 - linear rail Smart Orbiter v3
included with patronage ---- Step included Smart Orbiter v3 on a Fokoos odin5 F3 requires a top mounted linear rail MGH12H (300mm) Requires heat inserts: M3x4mm long, either 4.6 or 5mm outer diameter Needed screws are mostly M3x6 and M3x8, M3x12 with a couple M3x20 MGN12H top mounted X motor cover to install switch type endstop (something like this: Amazon) Beacon probe (standard) (only tested Rev H, but I think Rev D should work too) or Carto...
Fokoos Odin F5 - linear rail BIQU H2 V2S Revo
not meant for purchase here but part of the patronage ---- This will likely work with other hotend besides the Revo. And should work with most BIQU H2 variation. if the blower height is off let me know and I can just it, but usually the nozzle height is pretty standard. ---- Requires a minimum of 15 heat inserts: M3x4mm long, either 4.6 or 5mm outer diameter Needed screws are mostly M3x6 and M3x8, with a couple M3x20 MGN12H top mounted Might ...
Y tensioner revisited - GT2 20T toothed idler upgrade
In the 3d printing forums I've hear multiple times that toothed idler are better than the smooth counterpart, and that idea seems to hold up logically. So here are the printed parts for that upgrade. wether you have rails or wheels on Y. And the ender3 with a 4020 extrusion profile has not been forgotten, but is untested.These will work with smooth idler as well, GT2 20T smooth idler, and stock ender (the bearing that's in two parts with ...
Ender3 4248 Y motor upgrade
Tested and working.The ender3 wasn't getting as much love, but that's over, here is a dedicated mod for the ender3 (not the 3pro or 3v2, but 3 "v1") which has a different smaller Y extrusion, a 4020 instead of 4040 found on the 3pro/3v2, and required a tricky setup.for the ender3pro/3v2, 4040 extrusion I need to rework it, but it is fully functional (you'll find it in the Apollo zip, this is also included in the Apollo zip, un...
ApolloLander now supports MicroSwiss LinearRails backplate
You'll find it In the shop page Apollo reorganized hereStep file includedMounts after the hotend is installed as there are 4 mounting point to secure the backplate, use M3x6has been tested and working
New Y linear rail upgrade - MGN12H
Single piece easy print, the old one isn't bad in anyway, but I think this is a bit easier to install, plus looks better. If you are coming from my old design, same M5, nothing new. but no reason to upgrade from my old design, unless you just feel like it. - (8) Eight M3x6 for the linear rail carriage- (4) four M5x12 For the bed mount (those are not the same as stock screws, reason for shorter screws is to keep as much Z, longer screws will h...
BTT Knomi 1.0 & 2.0 mount
Posted on Discord, but for anyone not on there here is the fileHas been tested by nismojake ( discord ) and works! the Knomi is a round LCD screen, where temp info and such is displayed, V2 added touch capabilityamazon (US): https://amzn.to/3O64iVFbiqu (International): https://biqu.equipment/products/bigtreetech-knomi-v1-0-----should work on Apollo, Apollo Mini and SpeedsterM3x30, when used with a 4020 fansand M3x6 for the brace + threaded insert...
ApolloLander - 2024
included with patronage - USE 7zip on windows - I'm posting the newly slightly updated model of the apollo on a separate store page, so if you don't see the zip here, it's on the other page: https://www.patreon.com/squirrelf3d/shop/apollolander-2025-762128 Use the universal main body for wheels setup. ExtraLock for rails setup on ender3. Common_accessories is now a separated zip Some hotend have a main body labeled SuperFan and Ul...
ApolloMini - 2024
This is not meant for purchase, files accessible through patronage (2nd tier and up) reorganisation in progress, the zip date might change but STL will be the same, will just be adding more information to them. This new model has camera support and new adxl mount on top for easy install/removal Any hotend model supported by the ApolloLander can be converted to this, just let the know if you need anything. List of upcoming supported hotend: dra...
Apollo - Taichi Trident Prototype - for Drecoor
This is a Prototype. only STEP included, feel free to request STLs ApolloLander (dual 5015) Taichi Dual Orbiter 2.0 or dual Sherpa mini Meant for Voron belt path with belt teeth facing forward ----------- Do not buy - unless you want to give me a large donation ;) File included with patronage, second tier and up
ApolloHeavy (dual 5020 Delta fans) ~ Spider Pro v3 - CoreXY
included with patronage ---- This is a Prototype for Voron trident dual 5020 Delta fans and a beacon/cartographer as a probe use M3x8 on the rail mount and backplate to rail
ARRMA 40mm Motor - 4010 & 4020 dual fan mount (for RC cars) - STL+STEP
Not mean to be purchased, included with patronage Free stl on printables (https://www.printables.com/model/593170-arrma-40mm-motor-4010-4020-dual-fan-mount-for-rc-c) STEP file included here For a ARRMA 40mmØ motor (62mm long) fan mount used in some remote controlled cars. dual 4010 and dual 4020 mount Print should not need any print support. PETG or better for the clip part, since I assume it's on a hot motor. Clip itself is 62mm from end ...
MouseTrap (STL+STEP)
Not meant to be purshased, included with patronage, and stl free on printables ( https://www.printables.com/model/584629-mouse-trap-humane-for-catch-and-release) Last update - April 2024 (added magnet model, uses 6mmx3mm round magnets) This is a humane mouse trap for catch and release, so as to not hurt the mouse and allow relocation. Mouse was just for fun so included it anyway. Print support are optional. I only test printed it at 0.2mm lay...
Apollo Lander
This is also available with patronage (2nd tier and up), which I would recommend instead of buying this as you get access to other files and discord, even if you subscribe for just one month. ApolloLander Master File ( This is a compilation of the MasterRepo ApolloLander zips into one large zip ) (I didn't realize that I couldn't remove older files, so it's sadly messy, just get the latest dated ApolloLander zip, the rest was either...
ApolloKlack
For anyone not on discord this has been a concept made by SiFire, which was inspired by the klack ender by kevinakasam. I then redesigned some parts and improved some others, so no print support needed.The wheel model is not yet tested, feel free to test and report. But would likely workyou need to reach about X 248~249mm, you might need to tweak your [stepper_x] in klipper (just make sure you can physically reach it)Worse case, you would only ne...
Prototype - Apollo interface to "Ender 3 NG - coreXY" project by RH3D
This will potentially work (yellow piece on renders)now has endstop relocated to work with apollo-----This is regarding this project, EnderNG CoreXY by RH3D — converting a ender3 to a coreXY printerhttps://www.printables.com/model/469280-ender-3-ng-corexyThere was discussion on discord about the possibility to use the Apollo with the project.So I made that potentially happen without having to mod the Apollo so it would work as is with the linea...
